Friday 14 April 2018

Mean Well power supply to an amplifier board

In this tutorial we tell you how to connect the Mean Well power supply to a regular amplifier board. In this example we are using the Mean Well RS-100-24 and the Dayton Audio KAB-250A. However other combinations are possible! The combinations are listed at the bottom of this tutorial.

Step 1
Make sure you have the right products. As you can see in the picture you need three products: Mean Well RS-100-24, Dayton Audio Kab-250A and a C13 Power cable 1.5 meter.

Connect the Mean Well power supply to a regular amplifier board

Step 2
Cut the female plug of the C13 Power cable to expose the cables that are inside. There are three different coloured cables. Make sure that the cable is not plugged in (is unplugged). The green/yellow cable is the ground cable. The brown and the blue cables carry the AC current.

Cut the female plug of the C13 Power cable to expose the cables that are inside

Step 3
The yellow/green cable should be connected to the ground on the powersupply. The blue and brown cables should be connected to the L&N of the AC input. The power supply is now able to receive power from a normal AC power socket. The 230VAC 60Hz will be transformed into 24VDC. The voltage is adjustable with the potentiometer left of the indicator led and right of the V+ terminal. The voltage is adjustable for +/- 10%.

The yellow/green cable should be connected to the ground on the powersupply

Step 4
The Dayton Audio KAB-250 can now be connected to the powersupply. Make sure that you connect the black cable to the negative output (-V) and the red cable to the positive output (+V).

Dayton Audio KAB-250

Step 5
The last step is to connect a driver of your choice. In this case we use the Dayton Audio PS95-8.

Dayton Audio PS95-8

You're done!

Our power-supplies can be found by clicking the following link: power supply
Our amplifier boards can be found in this link: amplifier board
Our Woofers, and tweeters, can be found in this section: woofers and tweeters

The following combinations with power supplies and amplifier boards are possible:

Mean Well IRM-05-5 5VDC 1A 5W Switching Power Supply

miniDSP 2x4 Kit Digital Signal Processor Assembled Board
Sure Electronics AA-AB32131 2x2W 4 Ohm Class-D Audio Amplifier Board
miniDSP 2x4 Boxed Digital Signal Processor
miniDSP 2x4 Boxed USB DAC Digital Signal Processor
miniDSP 2x4 HD Kit Digital Signal Processor Assembled Board

Mean Well RS-35-15 15VDC 2.4A 35W Regulated Switching Power Supply

Mean Well RS-100-24 24VDC 4.5A 150W Regulated Switching Power Supply

Mean Well RSP-200-27 27VDC 7.5A 200W Regulated Switching Power Supply

Mean Well RSP-320-27 27V 11.9A 320W Regulated Switching Power Supply

Mean Well HRP-200-36 27VDC 7.5A 200W Regulated Switching Power Supply

Do you have questions regarding any of our products used in this tutorial? Please contact us via our chat, mail or telephone!

Tech Support
Posted on thursday 1 april 2021 11:09
Dear Chris M.,

Thank you for your comment and awareness. You are completely right. The wiring should be as you describe.

In this application there is no issue in swapping the leads, as there is also a change that Live and Neutral will get swapped at the wall socket. Nevertheless it is advised to follow the live and neutral indication with wiring in every application.
Chris M
Posted on wednesday 31 march 2021 23:29
The connection shown is incorrect.
Brown = Live
Blue = Neutral
Green & Yellow = Earth